Examples of TV set in the middle of the roomThe most important things to keep in mind when choosing such a design are easy to follow. First, you can hide the cable and cover the back of the TV with a room divider or room divider. Then place all components such as a cable duct in the corner behind the housing. You can also stow them somewhere in the TV wall if you have one. Use a power strip in the housing so that you can hide the stranded cable clutter in it. You only have to come out of the corresponding cabinet with a single power cord, or you may need to go wireless.
Room divider Ideas like this one fit perfectly with a large room, where you may have to delineate the different areas. The beautiful living room looks stylish from all sides and no superfluous furnishing elements or other parts come to view. By not being larger than necessary, the television defines the dining and entertainment area in the middle of the room, without actually separating the room.
Sockets are a handy help, and if you install a new one, you can place it directly under the TV cabinet. This allows more space under the cabinet for the plugs as they protrude a few inches from the socket. Create an access cover on the bottom of the case so you can reach the connector.
Room divider Ideas for TVs in the middle of the roomIn a living room with floor- to-ceiling windows, walls for the TV in the middle of the room are hard to find. It has also built a box for the flat screen, to accommodate this and adapt it to the rest of the design. The furnishings are close enough to a wall to possibly reach a power outlet. With all these windows, however, a plug on the ground is the better option.
Hiding the back of the flat screen TV does not make it any worse than the backs of the chairs or other pieces of furniture that are visible from the outside. If you do not want to see all the additional technical components like DVD players or cable boxes. Keep the doors of the cabinet ideally opaque. You can do this by installing a child device under the TV screen for each item that you need to run with a remote control.
This is not a TV in the middle of the room, but it is quite possible to integrate a similar positioning to your taste in your own room. For example, this TV cabinet has a motorized lifting device inside, so you can power up the flat panel TV. The whole thing you can lower accordingly, so that it remains hidden for other occasions. Such systems have long been on the market and can be installed in almost every cabinet with enough space.
That the TV has to go into the housing and you also need a bit more space for the engine, we would recommend a longer box. This allows you to place the components from below on both sides of the TV instead. For years, people have used automated elevators in TV cabinets at the foot of a bed. Take a close look and you can see the panel on top of the cupboard where the TV appears in the middle of the room. The only difference when placing the whole in the main living area is that you can not hide the string under a bed.
Cable duct with flush-mounted installationIf you can not find a cable cover that fits your floor, there are other creative ideas for hiding cable clutter. For example, self-adhesive contact paper is available in wood grain and a variety of colors. Buy paper that fits your floor as close as possible.
Wrap the cable cover with it. If you have carpets, fabric cable covers may be equipped with Velcro straps. They will therefore be on both sides and made of wool or heavy felt to fit your carpet as well as possible. To remove extra cables, try a splitter that is ideal for installing two lamps in one outlet.
For cables that are still free, you can use a cover with a rubber cord, or hide it again with contact paper such as wood grain. Use brackets for skirting, for example, to attach a cable guide to the wall or floor. It will also help to hide cables to avoid tripping hazards. If you have many cables connected to a power strip, you may also want to hide the strip.
Furniture can do wonders if they have to hide a tangle of cables. You can use self-adhesive clips to snake cables along table legs or under upholstered furniture. To maximize your ability to hide furniture, remember to change the socket or move the lamp from one side of the couch to the other. Also, think about whether another small piece of furniture could not help either. For example, console tables (the sleek table that sits behind a sofa) are a great way to relax lamps. These could also be a better place if you try to hide your cords.
Source: indecortrends.com